X optical security machine as a more commonly used security inspection equipment, what are the matters needing attention in operation? Below, we are going to introduce the operation steps of X-ray inspection machine.

The principle of the X-ray inspection machine is that the luggage enters the X - ray inspection channel and will block the package detection sensor. The detection signal is sent to the control part of the system to generate the X - ray trigger signal.

Preparation of X optical security machine before operation steps

Site operation steps:

When the X ray is being carried out at the scene, safety lines should be set up, and the "control area" and "management area" should be determined, and a clear warning sign should be set up.

The operator should wear a personal dose pen.

Operation steps of X optical security machine

1、Remove the debris in the channel of the X light conveyor belt; check the red emergency stop button on the inlet of the channel and the operating table, which should be clockwise, otherwise the equipment can't go on electricity; check whether the machine is placed smoothly, and whether the power socket is connected to the ground wire.

2、Plug in the power supply, turn the key switch clockwise to the open position, then press the start button (green button), at this time the machine ends the green power light, the whole machine is energized and automatically starts the computer; after the computer is fully started, click the sphoto.exe icon with the mouse to open the X optical machine application, and 3 seconds after the X optical machine. In the application interface, the machine starts to self check, the conveyor belt runs, and the "roller indicator" and "data transfer" button display green.

3、Wait 8 seconds after the machine self check stop, click the user button with the mouse or press "F7" on the keyboard to enter the user login interface, in the login numbered box with the digital keyboard input "98765432", the digital keyboard in the login password box "8888", and then click on the mouse click on the machine can start to use the machine.

   4、 With the mouse click or press the keyboard (forward) key (forward) key, the conveyor belt is running, the inspectors put the luggage on the conveyor belt to begin to check; when long time no luggage passed, click or press the "stop" key on the keyboard with the mouse, the conveyor belt stopped running, the machine into standby state.

    5、When the baggage has not come out in the channel, you can click on the mouse or press the keyboard (backwards) to run the belt reverse. After the baggage is withdrawn, click on the mouse or press the "stop" key on the keyboard. The conveyor belt stops running. When the luggage is out, please do not reverse for a long time, otherwise the conveyor belt will run off.

    6、When you turn off the computer, press the "ESC" exit button on the keyboard, and then click the "turn off the computer" and "return program" button. Using mouse to click "shut down computer", it will quit X ray machine application, clicking "return program" will not quit.

   7、 After getting out of the computer screen, click "start - close computer - shut down" in turn, and the computer will turn off automatically. At this time, the key switch can be turned counter clockwise to the closed position.

  8、  After waiting for 30 seconds, the machine green indicator lights will go off automatically and the machine will be cut off. After the power is off, the plug is removed and the machine is moved to the dry ventilating place for preservation.

    Purchase X light inspection machine, please recognize Shenzhen SHENFEI, SHENFEI quality, you are trustworthy.