Precautions for the maintenance and maintenance of the express logistics security machine
Author： Shenzhen SHENFEI Electronic Technology Co., Ltd.Publish time：2018-06-30 17:51:05Views：556【SML】
In the process of using the express check machine, good maintenance and maintenance are good. Good maintenance and maintenance can ensure the stability and prolong the service life of our equipmen...
Text label：
In the process of using the express check machine, good maintenance and maintenance are good. Good maintenance and maintenance can ensure the stability and prolong the service life of our equipment. Today, SHENFEI Xiaobian brings you some knowledge about the maintenance of the express inspection machine. Let's take a look.
1.Check the keyboard and the power indicator lamp above the channel. When the indicator light is on the device, the yellow indicator light is on.
2.Check the X ray indicator above the keyboard and channel. When the beam is launched, the red indicator light is on.
3. Check the keyboard and the emergency stop button above the channel to press any emergency stop button, and the device can immediately turn off the power. When the button is not reset, the device cannot start again.
4. Check all the electrical control buttons on the keyboard board. After the key switch is switched on, the start button can start the device. The ray stop button can disconnect the power supply of the ray controller. If the key switch is not sensitive enough, replace it.
5.Check all the keys on the keyboard and its corresponding functions, press the zoom button, and the image can zoom in. By pressing the image processing key, the displayed image can be transformed accordingly.
6. Check the exit and entrance light barriers to put opaque objects on the moving conveyor belt, and the rays can be properly opened. After the equipment is cut off, wipe the lens of the light barrier and the glass installed on the channel wall with dry silk cloth.
7. Check the electric cylinder and press the corresponding button, and the electric roller can operate in a predetermined direction. The noise of the drum is normal and no oil is leaking.
8. Check the travel switch on the probe box and collimator, remove any cover plate, and the rays can stop firing. 9. check the deviation of the conveyor belt. Check whether the conveyor belt has deviated from the motor.
10.Check the cooling fan to check whether the cooling fan works normally and clear the dust on the protective net and the bracket.
The quality assurance of SHENFEI express check machine ensures the quality of after-sales service and eliminates your worries. Welcome to buy SHENFEI express security machine.
18165709696
